Barracuda

This set consists of two complete sets of stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin and beautifully printed by Cartograf, and replace ..

This set consists of new resin main wheels for Ta-152H and some later production Ta-152Cs. They feature detailed tires with fine tire beading, logo and data, and accurate hub detail with molded in front hub brake cables. A big and easy detail upgrade for your Aoshima, Dragon or other Ta-152 kits. De..

This set consists of accurate and detailed 3D printed de Havilland and Rotol spinners to replace the inaccurate Airfix kit spinners. The kit Rotol spinner is far too long, and the de Havilland Spinner is too bulbous. A simple drop fit replacement that will make a real improvement in your model. Desi..

This set consists of a pair of accurately shaped, thin, distortion free, vacform sliding hoods to model an open canopy for your Spitfires. If you want to display your Spitfire with the canopy slid back, a vac hood will dramatically improve the look, as kit canopies are thick and will not fit over th..

This set consists of a pair of accurate resin wheels featuring super detailed hubs and treaded Z-Block tires with logo and data. These wheels were often fitted to Australian Spitfires, but were also used in Africa and the CBI theatre. Most kit 5 slot wheels are not very well done. A very noticeabl..

This set contains a pair of detailed 4 slot mainwheels with accurate hub detail, subtle tire beading & data. The tyre is block tread style (not Z-Block style). Fitted to postwar Mk VII thru 21 Spitfires operating from improved runways and carrier decks. Also installed on some Seafire XV, XVII, 45 an..

This stick is suitable for every Spitfire from The Mk Vb on through the Seafire FR 47. The spade grip features the rectangular housing for the 3 position trigger switch, and a molded on brake lever.This control column is offered in 3 versions. With and without gun camera button and a third versi..

This set includes two resin cast vertical F.24 camera faces, and one oblique F.24 camera (front and back inserts) for all PR/FR Spitfires and other RAF, FAA aircraft. Add some visible detail through the clear camera ports by replicating the front face of the cameras within. Quick and easy!..

Accurate resin contra-rotating prop blades to replace the poorly shaped kit blades in the otherwise beautiful Airfix Seafire FR. 46/47 kit. These were also fitted to some Spitfire Mk. 21s. The most important upgrade you can do to improve your contraprop Spitfire...

The set is designed for the superb Eduard MiG-21 series. The kit radome is accurate and well molded. The separate radome and bulkhead allow you to assemble the fuselage without the radome, which is then installed when the model is almost finished. This will allow you to fill and sand the intake seam..

This set consists of a pair of accurate, detailed, hollowed out exhaust stacks with mounting flanges & weld beads. Designed to be a drop fit for new tool Eduard Tempest Mks V and VI kits. Can be modified to fit other Tempest kits. A simple and very visible upgrade...

This set contains a new detailed de Havilland 4 blade spinner with smaller & accurately shaped blade openings to replace the kit spinner in the Series I and Series II kits. new tool Eduard Tempest V. Can be modified for use on other other Tempest and Typhoon kits...

Contains a new radiator front casting with the concentric ring type intake shroud that is missing from the new Eduard Tempest V kit. Tempests not fitted with dust filters would always be fitted with the shrouding to prevent hot radiator air from entering the carburettor intake. An alternate dust fil..

This set consists of a pair of smooth tread mainwheels, as fitted to most Birdcage Corsairs, as well as many wartime F4U-1 and 1a aircraft. Accurate resin cast mainwheels with logos and tire data are finished off with well fitting, super detailed, 3D printed wheel hub covers.Designed for the Tamiy..

This set consists of a super detailed, resin cast "raised cockpit" Corsair seat with molded-in American style harness & stitching decals. The harness is naturally draped and has plenty of relief to make painting easy. Painted up, this seat will rival the look of the best separate seat belt set insta..

This set consists of a pair of detailed early style distributors and duplex-style ignition harness ring for F4U-1, and early F4U-1A Corsairs. This high pressure ignition system was prone to failure in flight and was replaced on later models by the style found in the kit. Stubs have pilot holes for d..

This set consists of an accurate one piece, seamless resin carburetor intake duct and shroud. It replaces the somewhat crude multi-part duct found in the otherwise very nice PCM Tempest V. Also fitted to many Typhoons and other Tempest V kits...

This stick is suitable for every Spitfire from The Mk Vb through the Seafire FR 47. The spade grip features the rectangular housing for the 3 position trigger switch, and a molded on brake lever.This control column is offered in 3 versions. With and without gun camera button, and a third version..

This is for Spitfire Mk Is and Vs fitted with machine guns only. If it has an eight gun A wing, this is the set for you. The spade grip features the round housing for the trigger, as well as an attached brake lever.This control column is offered in 3 versions. With and without gun camera button..

This set contains a pair of detailed resin mainwheels with crisply molded, seamless and accurate diamond tread pattern. You can choose between plain, covered or 6 slot hubs. The inner wheel hub detail is visible through the slots of the outer wheel hub, bringing a whole new level of detail. Makes a ..

This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for the Trumpeter P-40B kits, replacing the vinyl/plastic wheels in the kit...

This set contains a new seamless resin supercharger intake, separate hollow cooling scoops and accurate and detailed exhausts with recessed openings to replace the kit items in the Revell G-10. Filling the seams inside the intake is a tricky and time consuming process. We have saved you from having ..

This set consists of 4 superbly accurate and detailed resin mainwheels with authentic diamond tread that even replicates the narrower center row of diamonds. Wheels also feature fine raised tire beads and extremely fine raised tire size information. This set also features separate pressure fittings ..

The Aero 1D 300 gallon tanks were widely used, and were carried in this configuration by all variants of the Skyhawk as well as the F4D Skyray. This set consists of a pair of highly accurate and detailed 3D printed droptanks, complete with separate shackles for mounting to pylons.Drop tanks are prin..