1/35 WWII British Vosper 72ft6in MTBs Super Detail Set w/Early Armament Config for Italeri

Out Of Stock

1/35 WWII British Vosper 72ft6in MTBs(Production Batch:MTBs 73-98,222-245)with Early Type Armament Configuration Premium Edition (Resin 0.303in Vickers MGs & 2in Rocket Flare Launchers & Brass Flash Suppressor for 0.5in Vickers MGs) [for ITALERI 5610 Kit]

This 1/35 scale full detail-upgraded set includes
(1)Photoetched Fret * 28
(2)Turned Brass Flash Suppressor for 0.5in Vickers MG * 2
(3)Resin .303in Vickers Machine Gun * 4
(4)Resin Ammo Drum for .303in Vickers Machine Gun * 8
(5)Brass Preformed .303in Vickers Machine Gun Ammo Drums Storage Cylinder * 2
(6)Resin Voicepipe mouthpiece * 2
(7)Resin Telephone Handset * 2
(8)Film for Wheelhouse Window * 1
(9)Thin Thread * 1500mm
(10)Thick Thread * 500mm
(11)Auxiliary Material: Styrene Rod, Copper Wire
Suit for ITALERI 5610 Kit

Detail Summary

Hull Section
(1)Reworked Boat Hooks with Mounting Base & Clamps
(2)Reworked Hatches of Watertight Scuttles with Open/Close Status
(3)Reworked Basering of Mushroom Ventilators & Glass Deck Lights
(4)Reworked Basering of Towing Bitt
(5)Reworked Ring of Portholes
(6)Reworked Mounting Base with Thick Thread for the CQR Anchor
(7)Thick Thread for Rope of Life Raft
(8)Oars for Life Raft
(9)Reworked Type 240/241 IFF Aerial Mast with 2 Installation Option
- Bow Located Configuration
- Bridge Located Configuration
(10)Thick Thread for Rope of Life Buoys
(11)Add Bolts to the Tube Joints & Tube Base of 21in Torpedo Tubes
(12)Reworked Portable Torpedo Loading Chocks
(13)Reworked Door with Hinges & Locks of Ready Use Ammo Locker
(14)Add Interior Details to the Companion to Engineroom
(15)4 * Full Detailed Depth Charge Chute with Thin Thread for Strop
(16)4* Full Detailed Cylindrical Ground Mine Chute with Thin Thread for Strop(Optional)
(17)8 * Portable Tripping Chock for Cylindrical Ground Mine
(18)Reworked Chutes/Chocks Basement on the Deck Surface
(19)Reworked Chemical Smoke Apparatus
(20)Reworked Cavitation Plates
(21)Clump Blocks, Screw & Slips for Rigging

Bridge Section
(1)Reworked Full Set of Wind Deflector
(2)Torpedo Director & Mounting
(3)Add Detail to Magnetic Compass & Engineroom Telegraph
(4)Compass Illumination Control Box
(5)Pushes for Horn and Alarm
(6)Push for Gun Turret Buzzer
(7)Resin Voicepipe Mouthpiece
(8)Resin Telephone Handset
(9)Socket for Telephone Handset
(10)Stowage for Telephone Handset
(11)Spyhole Covers
(12)Reworked Navigation Panel Switches
(13)Lockheed Fluid Header Tank
(14)Aldis Lamp Socket
(15)Depth Charge Release Gear (Optional)
(16)Reworked Portside Locker Seat/Signal Locker with Folding Canvas Cover/Locker
(17)Recognition Pistol Rack with Folding Canvas Cover
(18)Starboard Folding Seat
(19)Reworked Starboard Locker Seat/Signal Locker with Folding Canvas Cover/Locker
(20)Main Mast with Type286 Radar Aerials Mast or Type 291U Radar Aerials Mast

Wheelhouse Section
(1)Reworked Dashboard Panel
(2)Add Detail to Magnetic Compass & Engineroom Telegraph
(3)Lockheed Valves
(4)Telescope Clips
(5)Roof Lamp
(6)Film for Wheelhouse Windows
(7)Reworked Kent Clear View Screen with Electric Motors and Junction Box
(8)Resin Voicepipe Mouthpiece
(9)Loudspeaker
(10)Bookshelves
(11)Buzzer
(12)Chart Table Light
(13)Engineroom Orders Push Reply and Change Switch
(14)Resin Telephone Handset
(15)Socket for Telephone Handset
(16)Reworked Fire Extinguisher Remote Control
(17)Handrails
(18)Cupboard Door
(19)Drip Trough for the Window
(20)Reworked Ladder
(21)Lewis Machine Gun Ammo Drums Rack (Optional)

Resin .303in(7.7mm) Vickers Machine Guns with Twin
Mountings Section
(1)4 * Detailed Resin .303in Vickers Machine Gun with Photo-Etched Used Cartridge Case Chute
(2)2* Twin-Mounting with Front Sight & Rear Sight (Optional 2 Types)
(3)2 * Saddle Mount on 21in Torpedo Tube to Install Twin-Mounting
(4)2 * Tripod Mount Installed on Torpedo Tube (Optional)
(5)8 * Resin 100-Round Ammo Drum
(6)2 * Brass Preformed Ammo Drums Storage Cylinder

2in Rocket Flare Launchers Section
(1)2 * Full Detailed 2in Rocket Flare Launcher
(2)2 * Saddle Mount on 21in Torpedo Tube to Install 2in Rocket Flare Launcher

Mark V Twin 0.5in(12.7mm) Vickers Machine Gun Powered
Turret Section
(1)Turned Brass Flash Suppressors
(2)Reworked Sight & Sight Eyepiece
(3)Reworked Sight Operating Rod
(4)Reworked Gun Elevation Rod
(5)Reworked Gunner's Shield
(6)Reworked Ammo Belt Guide Rollers
(7)2 Types of Depression Rail and Depression Control Frame
(8)Reworked Turret Housing Shell with Openable Ammo Boxes Replacement Hatch
(9)Control Column
(10)Elevation Mechanism
(11)Ammo Box * 2
(12)Box for Empty Cartridges and Links * 2

General Info
Scale	1/35
Type	Model Upgrade/Accessory
Subtype	Detail-Up Parts Misc

Stock: Out Of Stock
Reward Points: 187
SKU: GR BPN35001

Griffon Model

MRP: US$155.15 Save: US$27.18

17% OFF

US$127.97 (excl. Tax)

Based on 1 reviews Write a review

Reviews

5.0

based on 1 review

Excellent item

100%

Good item

Regular item

Bad item

Terrible item

Filter

Sort by: usefulness date rate

Graham Day Myron

Excellent item

Verified Purchase

For the detail obsessed this will appeal to your OCD big time. Firstly the kit comes packaged in a good sturdy box with all the frets packed according to their usage and individual instruction sheets. Upon carefully opening the kit, I did find that a couple of PE frets did have creases from being bent against one end of the box, also one of the tiny resin telephone handsets was broken in two, this was not from shipping but happened at the time it was packaged. I might point out that this is the first Griffon kit with which I have had any issue. The parts themselves are beautifully made and offer the opportunity to create an extraordinary model. There are 30 brass PE sheets, which is a tad daunting, but if you take your time and work to the plans, you should have no problems, but keep in mind this is a very technical kit and requires a good deal of skill to get the best out of it. Having said that, if you start slow and are patient, by the time you get to the third of fourth fret, you will have fully got the hang of things and progress will speed up. To complete it with any degree of success, you will need a good quality PE bending press, a variety of fine tweezers, needle files (fine), and your favourite method of choice for trimming and smoothing the tiny PE attachments and of course CA adhesive, or if you are really brave, you can solder parts too. Also, note that some pieces will have to be rolled, so you'll need a good flat surface and some form of roller to form the brass around. Acrylic rod or similar works well. All in all, apart from the minor grumbles about the creases and broken phone, this is a great kit. Perhaps Griffon will replace the creased frets and broken phone, but perhaps not. I highly recommend it.